THERMAL SCANNING IMAGING SERVICES

Jaslec provides independent specialist thermography services in NSW. The preventative maintenance services we can offer include: 

Thermal Scanning: Thermal Imaging is an incredibly valuable diagnostic tool for identifying

potentially serious equipment faults which are not visible by naked eyes and for predictive maintenance. Early detection of abnormalities ensures that remedial action can be taken prior to the system failures which are costly and down time. Importantly, infrared scans are non-intrusive and don’t require system shutdowns. Scans are performed whilst equipment is fully functional and under load.

Electrical thermal imaging: To minimize the occurrence of fire caused by electrical fault electrical thermal imaging help to detect temperature changes in electrical component in switchboard and electrical infrastructure. it work using a specialized infrared camera to measure heat in the wiring of electrical component and connections. It reduce the chance of equipment failures and quickly identify the potential problem. jaslec recommend routine thermal scanning of electrical switchboards is include in home, office or business annual maintenance pregame. Our trained and experienced thermographers deliver high quality outsource services in the field of thermography.

PV Solar panel thermal survey: As temperatures rise solar panels become less efficient, producing less electricity. Some defects can cause them to break down or even produce a reverse current, which might damage the entire solar plant. Thermal imaging cameras can be used to detect hot spots in the panels from a distance, which makes it a lot easier to find defects before they become devastating breakdowns. Thermal imaging cameras from FLIR Systems are the ideal tool for the inspection of solar panels.

Cold-room insulation leakage:

 Thermal Scanning can be utilized to examine the thermal loss of key infrastructure such as cold rooms and freezers leading to cost savings. These cost savings come from reducing the electrical bill and having peace of mind, that heat intrusion will not cause spoilage. Cold rooms must be operational and under normal load during inspections to find the thermal faults as the difference in temperature is required.

RCD Testing: Residual Current Device’s (RCD)

also known as safety switches, are designed to trip (turn off) when current leakage is detected. These safety switches are installed to protect users from problems such as:
– Faulty appliances,
– Water in electrical fittings, and
– Rodent damage to cables.

Drone thermal inspections: Thermal Scanners have the capabilities to utilize Drone technology during its thermal screening inspections to reach harder to access regions, cover an extensive area quickly and thermal scan dangerous locations such as high voltage zones. Thermal Scanners utilize a drone with a FLIR thermal imaging camera attached to a 360° gimbal. However, the use of the drone can be weather and site dependent and may not be able to be used during rainy days or air space that is restricted.

Mechanical thermal imaging: Mechanical thermal imaging is the use of thermal imaging to examine the operating temperatures of various mechanical devices in operation. Thermal imaging can be carried out on a range of mechanical devices including:

– Pumps,
– Conveyor lines and rollers,
– Bearings,
– Motors, and
– Generators.

Insurance thermal survey: Jaslec Industries offer Insurance compliant reports that meet all requirements for insurance of your business or residential site. If any thermal or visual exceptions are found these will be communicated to the client with recommendations to investigate and fix. A repairs section is included at every fault and upon remediation, the electrician can sign off on any required repairs to complete the insurance report. After repairs Thermal Scanners can provide a rescan of repaired components for quality assurance at a reduced rate please inquiry today.